Product : ISaGRAF V3
Date : 12-March-1996
File : It.How to handle interrupts with ISaGRAF.htm
Subject : how to handle interrupts with ISaGRAF?
Keywords: interrupt
____________________________________________________________________
The ISaGRAF target kernel is a main loop (the cycle), and makes
pulling for I/O update. It is normally not designed for interrupt
handling.
On a multitasking host system, you can block an ISaGRAF cycle in the
"scan input" step, waiting for a hardware interrupt. This is an easy
way to run a cycle under interrupt. Be careful: the cycle timing
measured by ISaGRAF is no more significant in this case.
Generally, a low level action is programmed in "C" to handle an
interrupt, making a very simple reflex action. Such a processing
can be packaged in a "C" function block so it can be controlled
by an ISaGRAF cycle.
____________________________________________________________________
Copyright © 1996-2009 ICS Triplex ISaGRAF Inc. All rights reserved.